Results for machine mart xtra power tec 100mm pull ring
Machine Mart Xtra Power-tec - 100mm Pull Ring
Machine Mart Xtra Power-tec - 100mm Pull Ring: A replacement 100mm pull ring, suitable for use most pull clamps used in the vehicle bodywork repair trade.
Machine Mart Xtra Power-tec - 100mm Pull Clamp
Machine Mart Xtra Power-tec - 100mm Pull Clamp: Tough, durable and useful 100mm Pull Clamp from Power-Tec, great for various pulling applications. Featuring replaceable hardened steel jaws for long clamp life and 360 degree swivel yoke to avoid snagging.
Machine Mart Xtra Power-tec - Weld & Pull Upgrade Kit
Machine Mart Xtra Power-tec - Weld & Pull Upgrade Kit: An easy to fit, useful attachment manufactured to convert the Power-Tec Lifadent to the Power-Tec Weld & Pull, to be used to pull out smaller dents in bodywork needing more accurate, precise attention. Easy to fit and easy to use.
Machine Mart Xtra Power-tec - 45mm Pull Clamp
Machine Mart Xtra Power-tec - 45mm Pull Clamp: Tough, durable and useful 45mm Pull Clamp from Power-Tec, great for various pulling applications. With 5 ton pull capacity and pull yoke.
Machine Mart Xtra Power-tec - Floor Pull Plate
Machine Mart Xtra Power-tec - Floor Pull Plate: Ideal for general body and chassis pulling applications, this pull plate from Power-Tec is easy to install and use. With four chain fixing positions, for use with 10mm chain.
Machine Mart Xtra Power-tec - 70mm Pull Clamp
Machine Mart Xtra Power-tec - 70mm Pull Clamp: With 70mm jaws and 5 ton pulling capacity this durable pulling clamp from Power-Tec is ideal for a wide range of automotive bodywork pulling applications and can be used on various points around a vehicle. A great time and effort saving tool.
Machine Mart Xtra Power-tec - 100mm Self-lok Clamp
Machine Mart Xtra Power-tec - 100mm Self-lok Clamp: By eliminating the need to bolt the clamp to the panel needing repair, this self locking clamp speeds up pulls and saves valuable hook up time, meaning you can get the job done easily and quickly. The jaws are tightened by simply turning the pulling eye, helping to avoid clamp slipping, while the sprung wedge action ensure a continuous hold during the pull. A real time and effort saver.
Machine Mart Xtra Power-tec - G Clamp
Machine Mart Xtra Power-tec - G Clamp: This 100mm G Clamp from Power-Tec allows for dent pulling at various angles. The clamp allows for 4 ton pulls, while the 100mm opening means the clamp can operate around, over or behind damage with ease.
Machine Mart Xtra Power-tec - Pull Hook Set
Machine Mart Xtra Power-tec - Pull Hook Set: Ideal for a multitude of pulling tasks in the automotive bodywork repair industry, this pull hook set from Power-Tec has 300mm reach, 150mm depth and comes complete with small and large pull plates and also an adaptor for the 10 ton body kit. A real time and effort saver.
Machine Mart Xtra Power-tec - Multi Hole Pull Plate
Machine Mart Xtra Power-tec - Multi Hole Pull Plate: This handy multi hole pull plate from Power-Tec is suitable for a range of dent pulling applications in the automotive repair industry. Simple to use, the plate can be bolted onto a chassis or bodywork panel to allow for a quick, simple repair.
Machine Mart Xtra Power-tec - Pullrite Panel Puller
Machine Mart Xtra Power-tec - Pullrite Panel Puller: Easy to use, the Power-Tec PullRite is a clever piece of kit, designed to be used with squiggly wire to rough out panel damage. The PullRite simply hooks onto the squiggly wire after it has been welded to a panel, allowing for a firm, gentle pull to remove dents and dings. The PullRite can be pulled by hand, or by a slide hammer when a slightly firmer pull is needed.
Machine Mart Xtra Power-tec 91635 3 Claw Strong Pull Hook
Machine Mart Xtra Power-tec 91635 3 Claw Strong Pull Hook: This hook is used to adapt the Power-Tec Miracle system to allow users to use Power-Tec's multipads glue strips, manufactured for dent removal from automotive body work using strong glue.
Machine Mart Xtra Power-tec - Tec Spot Welder
Machine Mart Xtra Power-tec - Tec Spot Welder: The Power-Tec Tec-Spot Welder is a general use weld in professional bodywork repair shops and is suitable for a wide range of welding applications involving panel pulling pins, pull washers and squiggly wire. Complete with a variety of electrodes and supplied with a slide hammer and multi hook head.
Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit
Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit: A comprehensive tool kit for the repair of body panels all round a vehicle. Complete with everything you need to pull out and remove dents from bodywork. For use with a spot welder, mini welder or Power-Tec's Tec Spot to produce high quality results with ease, ideal for the professional bodywork mechanic.
Machine Mart Xtra Power-tec - J Hook
Machine Mart Xtra Power-tec - J Hook: This Power-Tec J Hook is ideal for quick pulls, when time is not on your side. Unlike other pull clamps that need to be screwed or bolted onto an object, this item simply hooks onto the work piece, for quick, easy pulls with minimum effort required from the user.
Machine Mart Xtra Power-tec - Door Post Puller
Machine Mart Xtra Power-tec - Door Post Puller: This easy to use Door Post Puller from Power-Tec can be used on a wide range of vehicles thanks to the puller's changeable hook location and variable pull positions. This tool is for use on bolt type hinge posts only.
Machine Mart Xtra Power-tec - 3 Ton X 2 Metre Strap
Machine Mart Xtra Power-tec - 3 Ton X 2 Metre Strap: Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 25mm wide and 2 metres long, this high performance strap with 3 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling and anchoring parts in areas where access is limited. Perfect for a variety of pulling applications, this strap is strong, reliable and great value.
Machine Mart Xtra Power-tec - 8 Ton X 0.75 Metre Strap
Machine Mart Xtra Power-tec - 8 Ton X 0.75 Metre Strap: Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 50mm wide and 0.75 metres long, this high performance strap with 8 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling and anchoring parts in areas where access is limited. Perfect for a variety of pulling applications, this strap is strong, reliable and great value.
Machine Mart Xtra Power-tec - 8 Ton X 1.45 Metre Strap
Machine Mart Xtra Power-tec - 8 Ton X 1.45 Metre Strap: Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 50mm wide and 1.45 metres long, this high performance strap with 8 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling and anchoring parts in areas where access is limited. Perfect for a variety of pulling applications, this strap is strong, reliable and great value.
Machine Mart Xtra Power-tec - Tight Opening Clamp
Machine Mart Xtra Power-tec - Tight Opening Clamp: Ideal for use in hard to pull areas, the tight opening clamp from Power-Tec features a 38mm wide jaw and has a maximum pulling capacity of 3 tons, making it perfect for pulling applications involving areas such as chassis ends, supports and light openings.