Results for machine mart xtra power tec pullrite panel puller

12345Next

Machine Mart Xtra Power-Tec - Pu...

Easy to use, the Power-Tec PullRite is a clever piece of kit, designed to be used with squiggly wire to rough out panel damage. The PullRite simply hooks onto the squiggly wire after it has been welded to a panel, allowing for a firm, gentle pull to remove dents and dings. The PullRite can be...



Click For Info
Machine Mart Xtra Power-Tec - Do...

This easy to use Door Post Puller from Power-Tec can be used on a wide range of vehicles thanks to the puller's changeable hook location and variable pull positions. This tool is for use on bolt type hinge posts only.



Click For Info
Machine Mart Xtra Power-Tec - Te...

The Power-Tec Tec-Spot Welder is a general use weld in professional bodywork repair shops and is suitable for a wide range of welding applications involving panel pulling pins, pull washers and squiggly wire. Complete with a variety of electrodes and supplied with a slide hammer and multi hook head.



Click For Info
Machine Mart Xtra Power-Tec - Sq...

The Squigley wire electrode kit is to for use with the Power-Tec Tec Spot kit and can be bought as a an additional electrode or as a replacement part. This is an integral part of the kit as it is used to weld the squigley wire onto the damaged body panel ready for repair.



Click For Info
Machine Mart Xtra Power-Tec - Pa...

A comprehensive tool kit for the repair of body panels all round a vehicle. Complete with everything you need to pull out and remove dents from bodywork. For use with a spot welder, mini welder or Power-Tec's Tec Spot to produce high quality results with ease, ideal for the professional bodywork...



Click For Info
Machine Mart Xtra Power-Tec - Sl...

Part of the Power-Tec Panel Medic Repair Kit (sold separately), this 1.5kg slide hammer is manufactured for use during spot welding applications in the automotive bodywork repair industry. This an easy to use bit of kit that ensures a brilliant finish.



Click For Info
Machine Mart Xtra Power-Tec - Mu...

This handy multi hole pull plate from Power-Tec is suitable for a range of dent pulling applications in the automotive repair industry. Simple to use, the plate can be bolted onto a chassis or bodywork panel to allow for a quick, simple repair.



Click For Info
Machine Mart Xtra Power-Tec - Pi...

A 45mm deep Pinza Clamp from Power-tec with a 50mm wide jaw, allowing the clamp to be used over flanges and deep onto the panel for a sure, non slip grip. Boasting 6 ton in-line capacity and 2 ton right angle capacity.



Click For Info
Machine Mart Xtra Power-Tec - Si...

Used with the Power-Tec carry car to transport vehicles around the workshop. Secures the vehicles to the carry via the sills, ideal for use on vehicles that have had their wheels and axles removed. Perfect for spray booths.



Click For Info
Machine Mart Xtra Power-Tec - Me...

This medium sized slide hammer from Power-Tec is part of the Power-Tec Miracle System and is used for pushing and pulling out dents and dings from automotive bodywork. Can be used as a replacement slide hammer, or as an additional hammer to the Miracle System base package.



Click For Info
Machine Mart Xtra Power-Tec - We...

An easy to fit, useful attachment manufactured to convert the Power-Tec Lifadent to the Power-Tec Weld & Pull, to be used to pull out smaller dents in bodywork needing more accurate, precise attention. Easy to fit and easy to use.



Click For Info
Machine Mart Xtra Power-Tec - Si...

Used with the Power-Tec carry car to transport vehicles around the workshop. Secures the vehicles to the carry via the sills, ideal for use on vehicles that have had their wheels and axles removed. Perfect for spray booths.



Click For Info
Machine Mart Xtra Power-Tec 9163...

This hook is used to adapt the Power-Tec Miracle system to allow users to use Power-Tec's multipads glue strips, manufactured for dent removal from automotive body work using strong glue.



Click For Info
Machine Mart Xtra Power-Tec - Ca...

Strong, safe and easy to use, this versatile car trolley from Power-Tec is fully adjustable and suitable for use with a wide range of vehicles of varying sizes. Mounted on four durable, heat treated castors for great mobility and complete with 2 axle fittings, two pin fittings and a pair of 150mm...



Click For Info
Machine Mart Xtra Power-Tec - J ...

This Power-Tec J Hook is ideal for quick pulls, when time is not on your side. Unlike other pull clamps that need to be screwed or bolted onto an object, this item simply hooks onto the work piece, for quick, easy pulls with minimum effort required from the user.



Click For Info
Machine Mart Xtra Power-Tec 9164...

A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.



Click For Info
Machine Mart Xtra Power-Tec 9163...

A pack of 50 1.5mm aluminium bits, manufactured specifically for use with the Power-Tec Miracle System, used for pulling and pushing out dents in bodywork and for automotive welding.



Click For Info
Machine Mart Xtra Power-Tec - Do...

This adjustable double aperture restraint from Power-Tec helps to avoid distortion to door openings and roof linings on vehicles while repair work is being carried out. Manufactured from tough, durable heat treated steel and fully adjustable, these are suitable for use on a wide range of vehicles....



Click For Info
Machine Mart Xtra Power-Tec - 10...

Tough, durable and useful 100mm Pull Clamp from Power-Tec, great for various pulling applications. Featuring replaceable hardened steel jaws for long clamp life and 360 degree swivel yoke to avoid snagging.



Click For Info
Machine Mart Xtra Power-Tec - Sc...

A 50mm wide Scissor Clamp from Power-Tec with 3 ton pulling capacity. Suitable for a wide range of pulling applications.



Click For Info
Machine Mart Xtra Power-Tec - Du...

This Duck Bill Clamp from Power-Tec is ideal for use in hard to reach areas where regular sized clamps are not able to fit. With a 30mm wide jaw, 65mm reach and 3 Ton capacity, this clamp may be slim, but it is just as capable as other clamps.



Click For Info
Machine Mart Xtra Power-Tec - Ca...

Strong, safe and easy to use, this versatile car trolley from Power-Tec is fully adjustable and suitable for use with a wide range of vehicles of varying sizes. Mounted on four durable, heat treated castors for great mobility and complete with 2 axle fittings, two pin fittings and a pair of 150mm...



Click For Info
Machine Mart Xtra Power-Tec - Ha...

Suitable for use with a wide variety of chains, this handy link from Power-Tec is used for linking up chains, filling gaps in broken chains or for simply taking slack out of them.



Click For Info
Machine Mart Xtra Power-Tec - G ...

This 100mm G Clamp from Power-Tec allows for dent pulling at various angles. The clamp allows for 4 ton pulls, while the 100mm opening means the clamp can operate around, over or behind damage with ease.



Click For Info
Machine Mart Xtra Power-Tec - 3 ...

Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 25mm wide and 2 metres long, this high performance strap with 3 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling and...



Click For Info
Machine Mart Xtra Power-Tec - Pu...

Ideal for a multitude of pulling tasks in the automotive bodywork repair industry, this pull hook set from Power-Tec has 300mm reach, 150mm depth and comes complete with small and large pull plates and also an adaptor for the 10 ton body kit. A real time and effort saver.



Click For Info
Machine Mart Xtra Power-Tec - 45...

Tough, durable and useful 45mm Pull Clamp from Power-Tec, great for various pulling applications. With 5 ton pull capacity and pull yoke.



Click For Info
Machine Mart Xtra Power-Tec - 8 ...

Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 50mm wide and 0.75 metres long, this high performance strap with 8 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling...



Click For Info
Machine Mart Xtra Power-Tec - Ca...

With 125mm x 65mm reach, 6 ton pulling capacity and a slim clamp leg for working over various obstacles that can be faced during automotive bodywork pulling applications, the CamLok clamp from Power-Tec is ideal for pulling work on vehicle chassis and other areas.



Click For Info
Machine Mart Xtra Power-Tec - 8 ...

Avoid the risk of damage during heavy pulls with this tough, durable pull strap from Power-Tec. 50mm wide and 1.45 metres long, this high performance strap with 8 ton pulling capacity avoids damage that regular chains can inflict on mechanical and interior parts, while it is also ideal for pulling...



Click For Info
Machine Mart Xtra Power-Tec - Fl...

Ideal for general body and chassis pulling applications, this pull plate from Power-Tec is easy to install and use. With four chain fixing positions, for use with 10mm chain.



Click For Info
Machine Mart Xtra Power-Tec - Ti...

Ideal for use in hard to pull areas, the tight opening clamp from Power-Tec features a 38mm wide jaw and has a maximum pulling capacity of 3 tons, making it perfect for pulling applications involving areas such as chassis ends, supports and light openings.



Click For Info
Machine Mart Xtra Power-Tec - Sw...

With the ability to be turned 360 degrees and boasting an impressive pulling capacity of 6 tons, this swivel clamp from Power-Tec is great for various bodywork pulling applications, especially awkward ones that need to be worked on from irregular angles and positions.



Click For Info
Machine Mart Xtra Power-Tec - 12...

A pack of 12 composite tips, manufactured for use with the Power-Tec Paintless Dent Repair Kit.



Click For Info
Machine Mart Xtra Power-Tec - 70...

With 70mm jaws and 5 ton pulling capacity this durable pulling clamp from Power-Tec is ideal for a wide range of automotive bodywork pulling applications and can be used on various points around a vehicle. A great time and effort saving tool.



Click For Info
Machine Mart Xtra Power-Tec - 0....

A pack of 100 0.6mm Stainless Steel 'W' staples, for use with the Power-Tec Hot Staple Gun.



Click For Info
Machine Mart Xtra Power-Tec - St...

Pack of ten stainless steel mesh gauze, manufactured to be used with the Power-Tec PRS20 Plastic Repair System. Essential item for the PRS20.



Click For Info
Machine Mart Xtra Power-Tec - 0....

A pack of 100 0.6mm Stainless Steel right angle 'U' staples, for use with the Power-Tec Hot Staple Gun.



Click For Info
Machine Mart Xtra Power-Tec - 0....

A pack of 100 0.8mm Stainless Steel 'W' staples, for use with the Power-Tec Hot Staple Gun.



Click For Info
Machine Mart Xtra Power-Tec - 0....

A pack of 100 0.8mm Stainless Steel 'V' staples, for use with the Power-Tec Hot Staple Gun.



Click For Info

12345Next