Results for olympus pol e101 o ring for ppo e and per e
O rings should be regularly inspected, maintained and replaced, in order to ensure a fully water and pressure resistant fit.
Click For Info
The Olympus PPZR-E01 Zoom Ring is a replacement zoom ring for the Olympus PPO-E02 and PPO-E03 Lens Ports.
Click For Info
A spare or replacement Olympus POL-EP14 O-Ring for the Olympus PT-EP14 Underwater case.
Click For Info
O rings should be regularly inspected, maintained and replaced, in order to ensure a fully water and pressure resistant fit.
Click For Info
O rings should be regularly inspected, maintained and replaced, in order to ensure a fully water and pressure resistant fit.
Click For Info
The Olympus PPZR-E05 Manual Focus Gear is for the PPO-E01 and PPO-E03 lens ports when used with the Olympus 35mm and 50mm macro lenses.
Click For Info
Designed for use with the Olympus 30mm f3.5 M.ZUIKO Digital ED lens, the Olympus POSR-EP11 Antireflective Ring is a spare or replacement anti-reflective ring for underwater housing. By blocking the writing on the front element of your lens from being reflected in the housing?s lens port, it...
Click For Info
The Olympus PPRC-E01 Rear Cap is the rear end cap for the Olympus PPO-E01/02/03/04/05 Lens Ports.
Click For Info
The DR-66 Decoration Ring is dedicated for the Olympus 40-150mm f2.8 PRO lens and is used to protect the tripod adapter mount in case the lens is used without tripod adapter.
Click For Info
The Olympus LC-52B Lens Cap spare or replacement clip-on lens cap for lenses with a 52mm filter thread.
Click For Info
Want to make doubly sure that Father Christmas stops at your house- Good behaviour is the biggest factor to consider, but a ring of this bell couldn't hurt. The side of this red bell reads "Ring for Santa", and it makes a glorious chime when you shake it. Just stand outside your house or at the...
Click For Info
The Lee Olympus 7-14mm Adaptor Ring allows you to attach the Lee Foundation Kit Holder (available separately) to the Olympus 7-14mm Pro f2.8 lens, giving you use of the 100mm filter system.
Click For Info
The Olympus PTMC-01 Macro Converter for PT-Series (67mm) has been specially made for the Olympus underwater cases that feature a screw thread of 67mm. If you are using the Olympus PT-EP01 Waterproof Case with the Olympus 14-42mm f3.5-5.6 lens, simply mount the Olympus PMLA-EP01 Macro Lens Adapter...
Click For Info
The Olympus PFUD-EP14 LCD Hood for Olympus PT-EP14 Underwater Case (not included, sold separately) reduces reflections and acts as a glare guard to provide easier viewing when shooting with the Olympus OM-D E-M1 Mark II in bright sunlight.
Click For Info
The Olympus BCN-1 Battery Charger is designed to charge the Olympus BLN-1 rechargeable Lithium battery for the Olympus OM-D E-M5 interchangeable lens camera and has a charging time of approx. 180 minutes. It has a rated input of 100V to 240V and can be used all over the world.
Click For Info
The Olympus PT-056 Underwater Case for Stylus TG-3 allows you to take your Olympus TG-3 digital camera as deep as 45 meters underwater. Its durable, high quality polycarbonate construction protects the camera from water while also cushioning it from knocks and bumps on dry land. Complete control of...
Click For Info
The lightweight, polycarbonate Olympus PT-EP08 Underwater Case for the Micro Four Thirds OM-D E-M5 is waterproof up to a depth of 45 metres and is designed to protect your Olympus E-M5 from knocks and bumps, underwater and on land. For fans of wide-angle photography, there is also a wide conversion...
Click For Info
The Olympus LH-61C Lens Hood fits the Olympus ED 14-42mm f3.5-5.6 and M. Zuiko 14-150mm f4-5.6 Lenses. It will aid in the reduction of lens glare and can help protect the front element from knocks. Not compatible with the earlier 14-42mm pancake lens.
Click For Info
This Olympus LC-48B Lens Cap combines elegant design and maximum protection. It is tailored to fit the M.ZUIKO DIGITAL 17mm f1.8 lens. It is made from metal for durability and style.
Click For Info
The Olympus VA-1 Angle Finder for E-1/-300 offers a twin solution for capturing unique shots, enabling focusing to be carried out from virtually any position by offering full size-view and 2x magnification. It is very useful when using telephoto, close-up and macro lenses.
Click For Info
To bring attention, whether in a reception or construction area where there is a doorbell to ring, you can attach an ASEC \"Please Ring for Attention\" sign. It comes in either a Gold or Chrome finish and is self adhesive, which makes it easy to fit onto most surfaces! It is 200mm x 50mm and comes...
Click For Info
BACO Reduction Ring for 22mm Elements 30/22mm - BACO LWA0220, A yellow reduction ring compatible with 22mm elements. BACO LWA0220 Reduction Ring for 22mm Elements 30/22mm Yellow
Click For Info
BACO Reduction Ring for 22mm Elements 30/22mm - BACO LWA0219, A grey reduction ring compatible with 22mm elements. BACO LWA0219 Reduction Ring for 22mm Elements 30/22mm Grey
Click For Info
TE Connectivity Accessories for DIN 72585 Round Plug Connector - TE Connectivity 965687-1, This retaining ring is designed for use with the TE Connectivity DIN 72585 round plug connector. This plug-connector is suitable for use with sensors, solenoid valves or power supplies. TE Connectivity...
Click For Info
Acuvue Acuvue Oasys for Asti (12 lenses per box) 1 x 12, weekly lenses, manufacturer:Johnson & Johnson
Click For Info
Acuvue Acuvue Oasys for Asti (12 lenses per box) 2 x 12, weekly lenses, manufacturer:Johnson & Johnson
Click For Info
Acuvue ACUVUE Oasys for Asti. (12 lenses per box) 4 x 12, weekly lenses, manufacturer:Johnson & Johnson
Click For Info
The Elinchrom Adapter Ring is a spare or replacement adapter ring for octagonal Elinchrom Rotalux softboxes.
Click For Info
Provides stable mounting and smooth rotation with excellent operability Canon Lens Tripod Mount Ring for EF 100mm f28L Macro IS USM Lens Box Contains Canon Lens Tripod Mount Ring
Click For Info










